CARLO GAVAZZI EN61036 Betriebsanleitung PDF herunterladen (Seite 14)

ENGLISH

ous variables at 4 digits or 3

digits.

• Range, to set the operating range of the digital filter. The value is

expressed as % of the full scale value.

• Coefficient, to set the filtering coefficient of the instantaneous meas-

urements. Increasing the value, also the stability and the settling time

of the measurements are increased.

Once any of the three parameters has been selected, set the desired

value by means of the and keys and confirm it with .

To exit the "Filter" menu, press

• Var: to select the variable to be coupled to the output.

• Min O: value expressed as % of the output range (0-20mA, 0-10V, etc.)

to be generated by the minimum measured value (Min In).

• Max O: value expressed as % of the output range (0-20mA, 0-10V,

etc.) to be generated in correspondence with the maximum measured

value (Max In).

• Min In: minimum value of the variable input range.

• Max In: maximum value of the variable input range.

To exit anyone of these menus, press

TO SELECT THE SERIAL OUTPUT (RS485 ONLY)

Select the variable to be set by means of the and keys and

confirm the selection with .

Set the desired value and confirm it using the key.

The configurable variables are:

• Address of the instrument: 1 to 255.

• Baud rate: 1200, 2400, 4800 and 9600 bauds.

• Parity: no parity, even parity and odd parity.

To exit the menu, press .

TO SELECT THE DIGITAL FILTER

Select the menu parameter using the and keys and confirm

it with .

There are three available selections:

• Display, to select the display of the measurements of the instantane-

1 2 ... 9 10 11 12 13 14 15 16 17 18

Keine Kommentare

CARLO GAVAZZI EN61036 Betriebsanleitung Seite 14