CARLO GAVAZZI WM23-96 - PROGRAMMING Bedienungsanleitung PDF herunterladen (Seite 35)

▲

Technical Features

General specifications

Electrical connections

Ripple:

≤1%

Load: 20 mADC ≤ 600 Ω; ±20 mADC ≤ 550 Ω; ±10 mADC

≤1100 Ω; ± 5 mADC ≤ 2200 Ω; 10 VDC ≥ 10 kΩ; ±10 VDC

≥10 kΩ; ± 5 VDC ≥ 10 kΩ; ± 1 VDC ≥ 10 kΩ

Insulation: by means of optocouplers, 4000 V

RMS

output to

measuring input 4000 V

RMS

output to power supply input.

RS422/RS485 (on request). Module: AR 1034

Type: Multidrop, bidirectional (static and dynamic variables)

Connections: 2 or 4 wires, max. distance 1200m, termina-

tion directly on the instrument

Addresses: 1 to 255, selectable by key-pad

Protocol: MODBUS/JBUS (RTU)

Data (bidirectional):

Dynamic (reading only): system and phase variables

Static (reading/writing): all the configuration parameters,

activation of the static output.

Data format: 1 start bit, 8 data bit, no parity,1 stop bit

Baud-rate: 9600 bit/s.

Insulation: by means of optocouplers, 4000 V

RMS

output to

measuring input, 4000 V

RMS

output to power supply input

RS232 (on request) - module AR1039 bidirectional (static

and dynamic variables)

Connections: 3 wires, max. distance 15m,

Data format: 1 start bit, 8 data bit, no parity, 1 stop bit

Baud-rate: 9600 bauds

Protocol: MODBUS/JBUS (RTU)

Digital outputs (on request) AO1059/AO1036 module

To be used as alarm or remote control.

Alarm outputs

Number of outputs: up to 2, independent

Alarm type: Up alarm, down alarm

Gross Automation (877) 268-3700 · www.carlogavazzisales.com · [email protected]

1 2 ... 30 31 32 33 34 35 36 37 38 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

CARLO GAVAZZI WM23-96 - PROGRAMMING Bedienungsanleitung Seite 35

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Messen, Testen & Steuern CARLO GAVAZZI WM23-96 - PROGRAMMING